A GUIDE FOR STARTING A LASER ENGRAVING BUSINESS

INTRODUCTION

Laser engraving is a subset of laser marking and as the name implies, is the practice of using lasers to engrave an object. The machines for laser engraving and laser marking are the same, so that the two terms are sometimes confused by those without knowledge or experience in the practice. In this article, we give some tips on how to start a laser engraving business.

 

MARKET FEASIBILITY AND RESEARCH

When planning to start this business, you should undertake a thorough feasibility studies and market survey as it concerns the laser engraving business. Also, it is important to discover the niche that is mostly in demand as this will give you an edge over your competitors. With an increase in the demand od personalized things, this market is on the boom. With experience, you can be sure to start right and float well.Also, in this line of business, there is more advantage in buying a Laser engraving franchise instead of starting a new business from the scratch. Information you collect should not be only from the internet, but from experts too. And people that have been into the business. One of the biggest challenges however is getting the machines because of limited funds.

Lastly,be sure to stay current with industry trends.

 

LEGAL ASPECT

In this business, you have just two perfect legal structures that seem to suit the business squarely- sole proprietorship and the LLC. But we believe that the legal structure you choose out of the two should be based on the size and scale of the business.Since your business is all about the income and interest of your clients, the LLC is the best legal entity for your business be it small, medium or large. Insurance Policies are needed too, especially for a booming business.

If you want to file for intellectual property protection and also register your trademark in it is beyond registering the name of the company and personalizing by using logos. It is necessary to register as a trademark as soon as possible.

 

FINANCING YOUR LASER ENGRAVING BUSINESS 

This has been defined by experts as a set of monetary resources and credit that will be needed by a company, business, organization or individual for them to carry out a particular activity or materialize a project. From just the definition, we all can see the great importance of finance in our business activities. It is expedient that you investigate reliable sources of funds which could be accessed. Possible sources include:Personal savings, Pitching, Angel investor, Partnership, Bank overdraft, Venture Capital, Loans forms family and friends, Loans and grants and Alternative funding source like Crowdfunding.

 

CHOOSING A SUITABLE LOCATION FOR YOUR LASER ENGRAVING BUSINESS

From our extensive research, we were able to note this business is a unique business that needs frequent human traffic to be able to succeed, which is why most laser engraving businesses choose their locations using population density, average adjusted gross income (AGI) in that surrounding area, and proximity to their target market. If you plan to be successful in this business, you need to make use of the same factors when choosing locations for your laser engraving business.

We also advice that you know the specific area you are considering very well. At least having or understanding how many people have access to that location, what income level they belong to, demographic and psychographic, and likely competition.

 

TECHNICAL AND MANPOWER REQUIREMENTS

From our research we have been able to note that people who flourish most in this business are those who are creative, sales-oriented and outside-the-box thinkers. Take a good look at your personality and see if you fit the description. If you are starting on a small note, then you may just stop at you being the only operator. On the other hand, if you are starting on a medium to large note, then you may consider hiring more hands. The machines needed are laser cutter,
CO2 laser tube, hobby laser, laser machine and CO2 laser cutter among others. Learn more.

 

THE MARKETING PLAN

A marketing plan is a detailed document that gives a vivid picture of what you want to achieve in your company, in time and with the financial resources necessary to achieve the objectives and strategies of the company. It examines the current situation of the company, performs its analysis, studies the competition, creates strategies and action programs to be implemented. Note that a well detailed promotional strategy gotten from the marketing plan could determine the success or failure of your business. Ways to market your laser engraving business may include;Building an attractive website, Business networking and partnership, Referrals, leveraging social media platforms and traditional advertising strategies, using marketing materials and Using satisfied customers testimonies.

 

CONCLUSION

Starting a laser engraving business could be exciting especially if the appropriate measures are taken. Make sure not to miss on this and see the business of your dreams grow bigger and bigger by the day.…

Continue reading

Difference between Fiber Laser and CO2 Lasers

The difference falls between the questions of what type of material are you using and how thick is it? The reason for this is because these lasers move at a particular rate, and if your material is too thick, then it won’t work for a particular laser machine. So, you’ll have to choose the right type of laser after you decide on your materials. There are many other factors that make these two lasers different, so we’ll get into it in a second, just keep reading.

The Science

Each laser type has been designed to function at a specific kind of wavelength. The absorption rate is profoundly influenced by the wavelength of the laser, and the angle of incidence. Different lasers have different types of wavelengths like the fiber SSL laser’s wavelength is way smaller at 1 micron than the CO2 lasers wavelength at the 10 microns. So, as you can see, the lasers are going to be good at cutting specific materials, but not all elements. Each has their strengths and weaknesses. You should do your research ahead of time and make sure that the laser you’re choosing to invest in is going to be enough for your personal or corporal projects.

Fiber Laser Cutter

The fiber laser has faster speed than the CO2 laser when it comes to cutting thin materials as the laser can be absorbed quickly and in speed when cutting nitrogen. It cost less than CO2 lasers part for part. It has strict safety precautions because the machine can pass through very narrow openings in the frame of the machine, meaning it can damage the eye’s retina. Lastly, it’s beam guidance is by fiber optics. Therefore, it makes a perfect pick for anyone who knows how to operate protective gear and needs a laser for lighter materials.

CO2 Laser Cutter

The quality is consistent throughout the use of all thicknesses. It’s flexible, high, and suitable for all types of materials. Its CO2 laser tube is better absorbed by the machine frame, which means that there is potentially less risk of damage to the eye and retina. Though, you should still not look directly at the cutting process unless you have the proper protective gear. It’s made from mirror optics, and it can cut with oxygen. Therefore, if you want a safe and effective laser that can cut almost any material out there, then this might be for you. See more.

Conclusion

So how can you tell which laser is better? We’d have to say that both of them are great lasers, but if you’re choosing a safer laser, then the CO2 laser wins. It can cut through almost any material, causes less risk to your eyes, and is built to be durable and reliable for years to come. There are many lasers out on the market, and before you go out and invest in one, you should always do your research. There are many scam lasers, which could end up hurting you and many others around you. So please be careful when you’re purchasing a hobby laser to use.…

Continue reading

Which CO2 Laser Tube Is Best – DC or RF?

If you’re attempting to understand the differences between a DC and an RF excited CO2 laser tube – to help with making a purchase decision – then this content is a good destination to start.  One of the first decisions when buying a CO2 laser for cutting and/or engraving is the choice between a Direct Current or Radio Occurrence excited laser tube.

The release creates a photonic co2 laser tube beam that bounces back and forth until a certain level of energy  is accomplished, then the photonic (light) beam exits the laser at one end.  This infrared beam is unseen but powerful as soon as focused may be used to trim or engrave various materials. Incidentally the word LASER is in fact an acronym that identifies this process:  Light Amplification by Stimulated Emission of Rays.

An alternative solution way to transfer energy in to the gas is via. radio occurrence (RF).  co2 laser tube technology is commonly referred to as “metallic” pipes. RF excitation produces a pulsed laser with an exceptionally quick repeatability. Unlike the parallel release in a DC fired up tube, the RF laser discharges perpendicular to the resonator.

Head to Head Comparison

When deciding which laser is most effective for your application, understanding the professionals and cons of each laser is critical. Below we break down the major factors when contemplating these different systems.

  • Cost: DC lasers manufactured from glass are roughly 10% of the price of RF lasers. This cost benefit is because a lesser technology and making cost. Border: DC
  • Trimming Performance: Both lasers maintain very high quality cuts. The border quality is virtually identical. However, because RF lasers are pulsed, some materials may show a slightly rough edge. This is apparent in acrylics. With that being said, this difference in quality is hardly visible to most users.
  • Engraving Performance: RF lasers create a smaller place size from the output home window of the laser. Small the spot size, the finer the engraving information. For high perfection engraving, this smaller spot size makes a difference. There are numerous applications where this advantage in quality won’t make itself clear. Advantage: RF
  • Endurance: Experience shows that RF lasers last 4-5 times much longer than DC lasers. This durability can help offset the initial higher cost of the RF laser. The gases inside RF lasers can sometimes be refilled but this technique can be more expensive than the replacement unit cost of new DC laser.

Comparing Laser Electricity RF vs. DC

If you were to compare a 100W RF to a 100W DC tube then assuming everything are identical – the energy is the same.  Electric power is electric power; However, RF electric power focuses that same energy into a more dense, smaller area size. The quality and stability of that beam is better as well. For detailed etching RF can offer that gain. However, with lowering you can afford to ‘buy’ a lot more cutting power compared to the expense of RF.  So, identifying what you would be making use of your co2 laser tube for can help you make that decision.

Boss Laser beam Advantage

Boss Laser is one of the one North American companies to offer both RF and DC lasers. Our expert knowledge in photonics we can help our customers select the right machine for his or her needs. Whether you represent a large corporation or are a self-employed businessman, we will contain the right co2 laser tube for you.…

Continue reading

Four Benefits of Living in an Apartment

When you were growing up your parents always had one primary lesson to teach you: grow up and buy a house to secure a future for you and your family.

The problem with this lesson is that too many people focused on the word house and not on the true sentiment of the lesson, which was to create a home.

With this in mind, below are some great benefits to choose apartment living to get you into a home sooner and starting your life towards financial security and raising a family.

Lower Cost

It comes as no surprise that house prices are becoming unimaginably high. And while apartment prices also continue to grow with the market they aren’t anywhere near as expensive as a house. In fact, you can often find a similarly sized space with an apartment for a fraction of the cost of a house.

The best place to start is by making a list of all of the things that you need out of a house, and then match them against an apartment.

For example, if you enjoy entertaining then look for an apartment complex which includes amenities to accommodate this, such as shared entertaining spaces, a BBQ area, or even a pool which you can use for your events!

Speaking of Amenities

On the subject of what you can expect to see included with an apartment life is the list of amenities. Of course, each apartment building will offer different amenities, however, you can expect the following as a bare minimum:

  • Pool
  • Gym
  • Sauna

In addition to the cost of a physical house, these amenities also come up a high price when installing and maintaining these items in a home and not a shared apartment building. Of course, it’s also worth noting that you are not responsible for the maintenance of these amenities.

Security

If you don’t like the idea of people knocking on your door or you need somebody to sign for all of the packages you receive from the Groupon Coupons page for Things Remembered then an apartment is a great option.

From 24-hour security services to access card operated lifts and doors, right through to a range of security cameras patrolling the shared spaces. This can be great peace of mind for those who are security conscious.

Family Friendly

There is a common misperception that apartments are only for single people or new couples who are looking to save for a house deposit, however, this simply isn’t true. More and more families are realizing that they can get a lot more for their money by moving into an apartment building. So much so that you can expect many buildings to offer you a range of family-focused services as part of their amenities package.

If you can’t afford to buy a house or you can’t find the right one in the area that you want, the above are great reasons to consider purchasing and living in an apartment instead.…

Continue reading

Starting A Laser Engraving Business From Home – Secrets You Must Know!

cutting machine

Do you think a CO2 laser cutting machine is necessary when starting up a laser engraving business? For a lot of people they have no clue as to what they need when creating a business at home. There are some who say they need a variety of tools while others say only one is needed! It can be difficult to know which way to turn especially when you are new to the business. If you want to learn a few simple secrets why don’t you read on and find out more.

Versatility Is Crucial

Are you going to limit your business? Sometimes you can in fact limit what you can do by simply choosing a co2 laser tube. If you do not buy the right engraving machine then you are in big trouble! You do have to think about how important it is to buy a machine that can handle engraving as well as cutting. If you’re choosing a machine that handles cutting only then it’s going to limit your business and that isn’t great. Versatility counts here and if you take the time to find the best machine you shouldn’t have too much trouble.

Renting Is Cheaper

You have to remember that buying a laser machine whether new or used outright, can be extremely expensive. It doesn’t matter how big a budget you have, the engravers can cost anything between five thousand and at times, twenty thousand! You might think you can get a cheaper deal somewhere but in truth it’s hard. However, renting or leasing a machine might be a lot easier and more cost-effective too. You absolutely have to think about renting more so than anything else. It’ll make a big difference and in truth you probably will save yourself a lot of money in the long-term too; or at least until you have enough saved to buy a machine.

Always Looks a the Power of the Laser Cutter You’re Buying

Next, you have to think about the machine you are buying and the amount of power and attachments it comes with. If you have a very basic engraver that can handle smaller items or just wood then you are limiting your business capabilities. A lot of business owners find this out when they have started their business and it’s a nightmare to say the least. However, if you take the time to find a good laser engraver with a lot of power and all the necessary attachments you shouldn’t have too much trouble. A co2 laser tube engraver can be ideal. You can get a high quality engraver with all the power you need.

Do Laser Research on Cheaper machines before Purchasing  

Engraving businesses are highly popular today simply because there is a real demand for them. People want personalization when it comes to everyday items and of course gifts and people want professionals who can do the job for them. Starting up a laser engraving business from home can be a lot easier than you think. Hopefully the above tips would have helped; just remember to do your research before purchasing an affordable laser machine!  You will want to read other buyers and forum experts who have experience with the brand or specific machine you are researching.  Read reviews but not those on the company website!  As an example I read these Camfive USA laser reviews here and found interesting feedback about the laser software.  This is very important insight to know prior to purchasing.  I did the same with many other laser companies before finally deciding.  I recommend the same for you.…

Continue reading

Characteristics of Laser Engraving Materials

laser cutter

Using a laser machine for cutting and engraving about any material is truly popular today.  DIY people and businesses are realizing the benefits of having a laser in their machine shop or garage.  There are now more people than ever wanting unique or customized engraving gifts and everyday objects. Making items more personalized is very important and it can be incredibly cost-effective too. However, there are a lot of materials for you to play around with when it comes to engraving and you need to understand what materials are easy to work with and which aren’t.

Plastics

Materials such as plastic can often be a little tricky to work with. The reason why is simply because plastic melts very easily so when you are engraving, the plastic can melt around the engraved area. What is more, if you were to finish the engraving the etching might be less than impressive or what you hoped for. This is again something you have to think about when it comes to using plastic. If you have to use plastic to engrave into then be wary. A co2 laser cutter can be a useful tool to use but you do need to ensure you understand fully how to use the machine.

Wood

Ideally, you should look at sticking with a hard wood rather than a soft wood. Oak wood can be perfect simply because it’s strong and very tough so engraving onto this type of wood shouldn’t be an issue. When you engrave you can create a nice finish and if you are useful with craft tools, it can be something which helps in many ways. A laser machine and engraver can work wonders here and you will enjoy how great the finish looks too.

Hard Paper

Despite what you might think, it is very much possible to use a co2 laser cutter to engrave paper! However, you do have to be extremely careful when it comes to paper. Hard paper is a lot better to work with than standard paper you find in printers and crafts stores. Usually, most people won’t have too much trouble with this type of paper and can usually engrave with use. Again you have to be a little wary what settings you are using for this.

Working with Glass

In truth, glass is highly popular today and certainly one material which engravers love! There are lots of simple gifts that can be purchased and made a little more special by engraving so it’s ideal to say the least. However, glass itself is often difficult to work with in terms of engraving. You have to be extremely careful with glass simply because it’s fragile at the best of times. When you apply too much heat from the laser onto the glass, depending on how thick it is, it can actually fracture and break. It’s something you have to be extremely wary of especially since it’s something which could shatter at any given moment. Even when you’re using such a machine and know what you’re doing, you have to be extremely careful to say the least. Always have a few practice runs – and use very low settings to avoid breakage.  Here’s a review of CamFive:  http://www.sidekickperformance.com/camfive-usa-ratings-reviews/.

 

Engrave Successfully

Doing it by hand is another option.  Engraving a variety of materials with a tool is not as difficult as you might believe. When you have a good and steady hand and some know-how as to what you’re doing, you shouldn’t have too much trouble.  It has never been easier to engrave though by using laser machinery.  And they will help you better enjoy engraving with more precision everyday materials.…

Continue reading

Address Your Stress

Laser cutting technology

When it comes to laser cutting, it’s a dangerous job or hobby. However, it’s easily worth it. It pays well, if you’re a pro, and if you’re a hobbyist: first off, congrats on being able to afford this high tech hobby, but secondly and more importantly, laser cutting gives you an unprecedented level of precision and cutting power with which to create beautiful sculptures and other works of art. However, there is still an element of danger and, with proper training and caution, you should be just fine. The problem arises as a result of prolonged exposure to the stress of this danger. Prolonged periods of stress can do some pretty nasty things to the human mind and body, including but not limited to mental illness. It will also inevitably affect your work and make it sloppy, and sloppy work and dangerous equipment just don’t mix. Therefore, it’s in your best interest to maintain morale and mental health by addressing your stress and managing it effectively. Here are some ways to relieve stress.

Laser cutting technology

First and foremost, consider the therapeutic power of some good old fashioned R & R. For example, taking a nice, long , hot bath after a hard day’s work will do wonders for your body and soul. The hot water is ideal for relaxing your muscles that are tense with stress after work. The quiet tranquility will have a similar effect on your mind, as well. However, baths may not be for everyone. In which case, might I recommend a nap? Taking a short nap after work will help you recharge your batteries in order to better enjoy your evening allowing you to return to work the next day bright eyed and bushy tailed. However, this advice so far has been aimed exclusively at introverts like myself, but extroverts will want to take a different approach to relaxation.

An extrovert is relaxed when they’re among friends, so their approach to stress relief will reflect that. One example of this is dressing to the nines in your new ASOS outfit, grabbing your gang, and going out for a night on the town. You could go out for dinner and a movie, for example, or go clubbing. Be careful however, as alcohol is sure to complicate matters if you’re working the next day. It will lead to a worse performance while feeling physically worse, which  is deadly combo.

If you’re a diy type you can do a lot of stuff in the garage to take your mind off of reality.  I recently took up laser cutting and engraving as a hobby.
B0ught a laser cutter and haven’t looked back.  Real stress reliever I’ve found.  You can check out the laser cutter company review here:  https://www.facebook.com/pg/BossLasers/reviews/?ref=page_internal

Continue reading

Using a Laser Cutter in an Apartment? Is It Safe?

laser cutter

Laser cutters are now more popular than ever.   These tools are utilized by a variety of hobbyists and businesses including those who’re creative and are into selling arts and crafts. Laser engraving for home use is really taking over and for many they love the idea of using an affordable laser cutter for personal use or small business. However, there are many who worry these machines aren’t safe enough for their apartments.  What will the neighbors or the landlord say?  You cannot blame people why they might think this since co2 laser cutters are often large and can produce some smoke and odors and so firing one up within an apartment, big or small, can be fraught with difficulties. So, the question remains – is a laser cutter safe to operate within an apartment and should you consider using it?

You Must Have a Proper Working Space Set Up

Is it safe to use a laser cutter within your apartment? First, you might want to talk to your landlord.  I think that’s obvious.  But, you don’t want to get stuck after spending $5k+ what you’re going to do if you’re asked to remove it.   As far as safety a desktop laser cutter around 50/60 watts can be more than safe when you have properly set up the machine and have a safe working environment. When you have a spacious area in your apartment or garage to use the machine you shouldn’t have too much trouble finding a spot for it.  Most operators place it near a window.   However, if you have limited space then the safety factor can become an issue. You ideally need to have sufficient space to work so that you can keep everyone, including yourself, safe at all times. Without a proper working space you can have trouble.

Fume Extraction System

Also, keep in mind that you may need to have to save some space for a laser fume extractor.  During laser processing you will have some smoke, fumes, and odors to remove.  Most of the time the laser company you buy from will provide a simple fume extraction system that vents all the fumes and debris outside via. an exhaust fan and tubing.  You can use a window or go through the wall or roof.  However, if you don’t have the ability to vent outside then you’ll need a fume extractor that first filters the contaminated air then recirculates it back into the air.  If you plan to process a lot of acrylic or plastic you will definitely need a fume extracting unit since these materials are super strong.

Educate Yourself on Using a Laser Cutter

Laser cutters are not too difficult to use in any way, as long as you know how to carefully use them. Now, you might think laser cutters are easy tools and that you can just go ahead and use them but in truth you need experience. It’s wise to know how the laser cutters work so that you know the proper safety procedures for setting the machine up and using it. Remember, working within smaller spaces can be more challenging especially when you have larger items to cut so you need to give yourself ample room to work. read her latest blog posted at http://www.arcadiaapartmentshotel.com/how-much-ventilation-in-your-apartment-do-you-need-when-using-a-laser-cutter/

How Safe Are Laser Cutters?

laser cutter

China lasers imported via. Ebay, Amazon, Walmart, etc. are notoriously dangerous.  Cheap comes with a price and forums often display upset laser operators who imported a China laser direct.  Bodor is a Chinese based laser company that has reviews to watch for.

To be honest, a lot of people don’t think laser cutters are safe enough to use within a household and it’s easy to understand why. Apartments aren’t always the biggest and working within a confined space can be extremely dangerous to say the least. However, laser cutters can be safe to use within an apartment as long as you offer sufficient ventilation and have a good working environment. For example, if you have a spare room or area within the home that’s dedicated to this type of work then you can have a good working space. However, if you set up the machine in the middle of the living room floor with people coming in and out every so often then it’s not safe. The way you set your laser cutter up and use it will depend on how safe it is to use. learn additional tips straight from the source.

Enjoy Using Your Machines At Home

Desktop laser cutters at home are fantastic tools for hobby or business. You can easily set them up and when you know how to properly work them, they run amazing well.  The price is typically affordable but again I would stay clear of buying cheap and importing from China.  However, when it comes to using a laser cutter within your apartment, you have to make sure there is a proper working environment so that there aren’t any issues whatsoever. Again, keep in mind that you’ll need to exhaust the fumes and odors during processing.  Problems can arise when you don’t prepare your apartment sufficiently enough so take that into consideration. Enjoy using your laser cutting machines at home.  You can review Boss Laser here as well.…

Continue reading

How to Minimize Fumes When Using a Laser Cutter in Your Apartment

laser

Laser cutting machines are the new fad! There are now thousands using these and the best thing of all is that you can rent for a day and spend little on these. However, while these are great tools a lot of people are worried about the fumes that come from this machine. Using a laser cutter in an apartment has become really popular and it’s simple to run also but fumes are something you have to be concerned with. If there are too much fumes, it can cause serious issues for you. Read on to learn how you can easily minimize fumes within your apartment when using a laser cutting machine.

Always Keep the Window Open

Fumes are a real issue for a host of reasons when using a laser cutter and it’s important to ensure you have sufficient ventilation. Without proper ventilation you can easily become frustrated by the fumes and can start affecting your health too. That is why you must look at keeping the window open when working in a small room. If you’re not in a small room but a large one, still take ventilation into consideration. It’s wise to look at keeping all windows open so that a build-up of fumes won’t affect the household and keep doors open too. If you’re working in a garage then you should keep the garage door open so you get plenty of ventilation. Remember, your apartment can become very stuffy with the fumes and that might cause some trouble for others. It’s necessary to ensure you use your ventilation systems and keep the windows open at all times. need more updates? visit https://www.knox.edu/news/3d-printing-laser-cutting-and-more-knox-engineers-club

Work In Short Batches

A lot of people think putting the laser cutter on for a matter of one or two small cutting jobs is a waste of time and wait until there are hundreds of little jobs to do. That might sound smart but in truth it’s going to cause more fumes. If you want to minimize fumes when you’re using a laser cutter, especially in a small apartment, you have to consider working in smaller batches. When the laser cutter is needed, use it rather than allowing lots of things to pile up. The more you use the machine the more fumes there will be. Cutting down on usage or when you need to use it, will help keep your apartment free from a heavy build-up of fumes.

Don’t Over Use the Machine and Don’t Use It When Broken

laser

If there is a problem with the laser cutter, it might cause even more fumes to spill out. This is why you should never attempt to use the laser cutter when it’s broken, even if it seems to be running fairly well. When there is an issue with the machine and more fumes are spilling out, it’s going to get to the point where you struggle to work. Instead, maintain the machine on a regular basis and keep it in the best condition possible. Also, don’t overuse the laser cutter. If you use it for hours on end you’re going to see fumes spill out all over. visit this link for more information.

Keep the Fumes Out

Minimizing fumes within the apartment will be crucial especially when working in a confined space. Too many people dismiss this and yet it could cost them dearly. You are always going to have some fumes when dealing with a laser cutter but you can keep them really undetectable when you having proper ventilation. When you know how to minimize fumes you can keep the apartment safe and fume-free.  And if you’re looking for laser cutting ideas check out this Boss Laser cutter ideas on Pinterest.  Whether you want to laser cut a wood chess set, book, candle holder, lamp shade, or just simply laser cut your name – these ideas are great for any DIY’er.…

Continue reading

How Much Ventilation In Your Apartment Do You Need When Using A Laser Cutter?

cutting machine

Within the last few years, it seems everyone is getting their hands on laser cutting machines and it’s not hard to see why. These tools are really quite nifty and they make cutting glass, plastics and a whole lot of other things easy. However, there are questions over whether or not it’s safe to use within an apartment and how much ventilation is needed. These are often difficult to answer and usually people don’t talk about them either. So, how much ventilation does your apartment need when using a laser cutter?

How Small Is the Room you’re working in?

When you are working in a confined space the fumes from the laser cutter can become an issue. You wouldn’t think a laser cutter would spill a lot of fumes when in working order but you have to remember, you’re cutting so there will be fumes and debris. That is why you need to know the area in which you plan to use the laser cutter so that you can get proper ventilation. When working in a bedroom, spare room or an office, you need to keep the door opened and the windows open also. This will help cut down on the fumes and ensure proper ventilation is given.

How Long Do You Plan To Use The Laser Cutter For?

For most, they don’t know how much ventilation is needed when using a laser cutter in an apartment and it can be difficult to know for sure. However, it can be more than useful to know how long the laser cutter is needed. When you know this, you will be able to get the right amount of ventilation within the home. If you are using the machine for a short amount of time then you probably will find a window will be sufficient. However, if you are using the machine for a prolonged period of time, it would be wise to look at adding even more ventilation so that the apartment is aired.  There’s quiet a few cheap air fume extraction units or purifiers out there many made in China that really leak a lot of fumes and odors.  In fact I would not ever buy a Chinese laser fume extractor if you are laser processing acrylic or leather.  They just can’t handle the fumes and debris and you’ll know right away.  Prices range from $500 for a cheap Chinese fume extractor to six thousand for a large US made system that can evacuate large cavity laser cutters.  Here are some US made laser fume extractors for acrylic.

Do You Have A Ventilation System In Your Apartment?

Apartments can have good ventilation systems so that each room gets a dose of clear air and removes dust particles also. If you have one of these systems, you must turn it on whilst dealing with a laser cutter. Remember, you will have fumes from the machine and while you might not mind them at first, they can soon become an issue. It is necessary to consider using the ventilation system if you have one to use. If there isn’t one then of course you won’t have this as a solution but if you do, it’s worth using it, if only to help keep your apartment fume free.

Stay Safe and Take a Break

cutting machine

Sometimes if your apartment is far smaller than say a home or the room you’re working in has limited ventilation, you shouldn’t be hold up in the room for long. Laser cutters are quick to use and usually aren’t too much trouble but if you have a lot to do, the task can go on for hours. You ideally don’t want to be stuck laser cutting for hours as fumes will become an issue. That is why you need to ensure you have proper ventilation within the household. If you’re working in a smaller room, keep the windows open. Also, take a little break every thirty to forty minutes so that you give time for the fumes to clear and for you to recover from them.learn more updated articles at http://www.arcadiaapartmentshotel.com/how-to-minimize-fumes-when-using-a-laser-cutter-in-your-apartment/

Proper Ventilation Is Important

Too many people dismiss the notion of proper ventilation. It seems utterly crazy because without ventilation the fumes from the laser cutting machine can become a real nightmare. Without proper ventilation, an apartment can become stuffy and extremely uncomfortable to be in. that is why you really need to consider ventilation and how much is going into the apartment. Keep yourself safe and remember to clear the air after using the laser cutter.…

Continue reading